Machines and Devices for Pipe Cleaning, Refurbishing and Laying

Pipe Cleaning and Pipe Renewal Winches
Pulling force: from 20–100 kN
Thaler Hydraulic double capstan-head winches with autopretension device are used for Pipe Cracking, Pipe Cleaning, Pipe Relining and in combination with a Swagelining unit.
– rope length up to 1000 m
– rope speed infinitely variable from 0–max. indication on electronic measuring system
– pulling force measuring with and without registration
– telescopic deviation poles

Pipe Renewal Winch in operation

Measuring unit with operation elements for autopretension device

Remote control for Pipe Cleaning and Pipe Renewal Winches:

Hand remote control

Remote control with carrying strips

Remote control by radio transmission

Machines and Devices for Pipe Cleaning, Refurbishing and Laying

Tube bundle winch for concrete lining (patented)
Pulling force: 30 kN
The tubes for supplying the cement mortar and compressed air to the centrifugal head which will be connected to a steel rope as a ”tube-bundle“ can be pulled out and in a constant speed regardless of the load. This procedure can be repeated as often as you like without re-connecting the tubes to the rope after each pull as needed by using a normal winch.
– hydraulic drive, electric- or diesel engine – constant pulling speed regardless to the load and to the coiling diameter on the drum
– infinitely variable adjustable turning speed of drum
– drum capacity for tube bundle length of 300 m
– double channel writer for measuring and recording

Sewage pipe before and after cleaning and renovating by concrete lining.

Tube drum trailer type TTA5877 Combi
For inliner-tube drums
– Drum diameter: 2200–3700 mm
– Clear loading width: 1720 mm
– Carrying capacity: 6520 kg

Tube laying trailer with unreeling basket for PE-tube coils

Combined cable drum- and tube coil transport trailer type TTA2091, hydraulic
– payload 2250 kg and 2620 kg
Purchase No.: TTA2091A (carrying capacity 2250 kg)
Purchase No.: TTA2091B (carrying capacity 2620 kg)
– transport- and unreeling basket for plastic tube coils (also seperately available)
max. tube coil dia. 3700 mm
max. width of coil 1200 mm
max. tube dia. 160 mm
Purchase No.: A535-89.00-00/0

Transport- and unreeling trailer for tube coils
The transport- and unreeling basket can be taken off and the trailer is equipped with ramps to transport mini-excavators etc.
Length: 5990 mm
Width: 2210 mm
Height: 3300 mm (without tube coil)
Carrying capacity 1000 kg
Other capacities upon request.

Unreeling baskets for PE-tube coils

Tube coil frame RAW2200 for gas and water pipes
– for pipe dia. 32, 40, 50 and 63 mm
– max. tube coil dia. 2200 mm
– max. tube coil width 500 mm
This tube coil frames are not only for transportation to the site, but also suitable for storing the coils.
Other coil dimensions upon request.

Accessories for Laying of PE-tubes

Pipe laying roller
for pipe dia. up to 300 mm, carrying load 200 kg
Purchase No. Z 812-20.00-00/0

Pipe laying roller
for pipe dia. 100–760 mm, carrying load 400 kg
Purchase No. Z 806-02.00-00/0

Pulling heads
for gas-, water-, sewage- and HDPE-tubes, for 32–250 mm tube dia.

For other accessories please have a look to our leaflet ”Cable Laying Accessories“.
Let us have your detailed inquiry in order to prepare an offer suitable to your demands. In case of special problems
at site our engineers will be ready to give you assistance, too.
Technical changes reserved