Pipe Cleaning and Pipe Renewal Winches

Line 2000

Pipe Cleaning and Pipe Renewal Winch Line 2000
2000-3000 daN Pulling force

The hydraulic pump is equipped with a special adjuster. By this it is guaranteed that the adjusted speed is always kept constant.

The pulling speed may be regulated by a hand wheel continuously from 0 to max. Furthermore the pulling force is adjustable by a hand wheel as well from 0 to max. When the pre-selected pulling force is reached the hydraulic pump is regulating to “Zero-supply” and the winch operation is stopping whereas the pulling force is staying constant (pre-tension-system).

Amongst others Thaler Pipe Renewal Winches are used for Pipe Cracking, Pipe Cleaning, Pipe Relining and in combi-
nation with a Swagelining unit.
They are constructed under strict compliance with the machine guidelines of the European Community and with their
chassis approved by TÜV (Technical Surveyance Authorities) they are admitted to the public traffic.

Standard equipment

  • Double capstan system, both capstan heads are driven
  • No chains between hydraulic engine and capstan system
  • Hydrostatic drive
  • Petrol or diesel engine
  • 500 m usable rope length, smaller or bigger rope lengths upon request
  • Drum capacity for bigger rope lengths:
      • KE-SP 2020, with 2.000 kg pulling force and an max. rope length up to 1500 m, Dia. = 8,0 mm
      • KE-SP 2030, with 3.000 kg pulling force and an max. rope length up to 1000 m, Dia. = 9,5 mm
    • Automatic rope guidance to the drum
    • Pre-tension-system
    • Pulling force control by electronic measuring system with USB port and stick - SYSTEM TM 3000
    • Single axle chassis with overrunning brake, straight drawbar and jockey wheel
    • Metal hood
    • Loading equipment with central crane hook
    • Painting: RAL 5015 (blue)
Read More

Line 3000 as Pipe Renewal Winch

Pipe Cleaning and Pipe Renewal Winch Line 3000
2000-5000 daN Pulling force

The hydraulic pump is equipped with a special adjuster. By this it is guaranteed that the adjusted speed is always kept constant.

The pulling speed may be regulated by a hand wheel continuously from 0 to max. Furthermore the pulling force is adjustable by a hand wheel as well from 0 to max. When the pre-selected pulling force is reached the hydraulic pump is regulating to “Zero-supply” and the winch operation is stopping whereas the pulling force is staying constant (pre-tension-system).

Amongst others Thaler Pipe Renewal Winches are used for Pipe Cracking, Pipe Cleaning, Pipe Relining and in combi-
nation with a Swagelining unit.
They are constructed under strict compliance with the machine guidelines of the European Community and with their
chassis approved by TÜV (Technical Surveyance Authorities) they are admitted to the public traffic.

Standard equipment

  • Double capstan system, both capstan heads are driven
  • No chains between hydraulic engine and capstan system
  • Hydrostatic drive
  • Petrol or diesel engine
  • 500 m usable rope length, smaller or bigger rope lengths upon request
  • Drum capacity for bigger rope lengths:
      • KE-SP 3020, with 2.000 kg pulling force and an max. rope length up to 2200 m, Dia. = 8,0 mm
      • KE-SP 3030, with 3.000 kg pulling force and an max. rope length up to 1600 m, Dia. = 9,5 mm
      • KE-SP 3040, with 4.000 kg pulling force and an max. rope length up to 1200 m, Dia. = 11,0 mm
      • KE-SP 3050, with 5.000 kg pulling force and an max. rope length up to 1000 m, Dia. = 11,0 mm
    • Automatic rope guidance to the drum
    • Pre-tension-system
    • Pulling force control by electronic measuring system with USB port and stick - SYSTEM TM 3000
    • Single axle chassis with overrunning brake, height adjustable drawbar and jockey wheel
    • Metal hood
    • Painting: RAL 5015 (blue)
Read More

Line 4000 as Pipe Renewal Winch

Pipe Cleaning and Pipe Renewal Winch Line 4000
4000-5000 daN Pulling force

The hydraulic pump is equipped with a special adjuster. By this it is guaranteed that the adjusted speed is always kept constant.

The pulling speed may be regulated by a hand wheel continuously from 0 to max. Furthermore the pulling force is adjustable by a hand wheel as well from 0 to max. When the pre-selected pulling force is reached the hydraulic pump is regulating to “Zero-supply” and the winch operation is stopping whereas the pulling force is staying constant (pre-tension-system).

Amongst others Thaler Pipe Renewal Winches are used for Pipe Cracking, Pipe Cleaning, Pipe Relining and in combi-
nation with a Swagelining unit.
They are constructed under strict compliance with the machine guidelines of the European Community and with their
chassis approved by TÜV (Technical Surveyance Authorities) they are admitted to the public traffic.

Standard equipment

  • Double capstan system, both capstan heads are driven
  • No chains between hydraulic engine and capstan system
  • Hydrostatic drive
  • Diesel engine
  • 500 m usable rope length, smaller or bigger rope lengths upon request
  • Drum capacity for bigger rope lengths:
      • KE-SP 4040, with 4.000 kg pulling force and an max. rope length up to 1400 m, Dia. = 11,0 mm
      • KE-SP 4050, with 5.000 kg pulling force and an max. rope length up to 1200 m, Dia. = 12,0 mm
    • Automatic rope guidance to the drum
    • Pre-tension-system
    • Pulling force control by electronic measuring system with USB port and stick - SYSTEM TM 3000
    • Single axle chassis with overrunning brake, height adjustable drawbar and jockey wheel
    • Metal hood
    • Loading equipment with central crane hook
    • Painting: RAL 5015 (blue)
Read More

Line 6000

Pipe Cleaning and Pipe Renewal Winch Line 6000
5000-10000 daN Pulling force

The hydraulic pump is equipped with a special adjuster. By this it is guaranteed that the adjusted speed is always kept constant.

The pulling speed may be regulated by a hand wheel continuously from 0 to max. Furthermore the pulling force is adjustable by a hand wheel as well from 0 to max. When the pre-selected pulling force is reached the hydraulic pump is regulating to “Zero-supply” and the winch operation is stopping whereas the pulling force is staying constant (pre-tension-system).

Amongst others Thaler Pipe Renewal Winches are used for Pipe Cracking, Pipe Cleaning, Pipe Relining and in combi-
nation with a Swagelining unit.
They are constructed under strict compliance with the machine guidelines of the European Community and with their
chassis approved by TÜV (Technical Surveyance Authorities) they are admitted to the public traffic.

Standard equipment

  • Double capstan system, both capstan heads are driven
  • No chains between hydraulic engine and capstan system
  • Hydrostatic drive
  • Petrol or diesel engine
  • 500 m usable rope length, smaller or bigger rope lengths upon request
  • Drum capacity for bigger rope lengths:
      • KE-SP 6050, with 5.000 kg pulling force and an max. rope length up to 2000 m, Dia. = 12,0 mm
      • KE-SP 6060, with 6.000 kg pulling force and an max. rope length up to 1500 m, Dia. = 14,0 mm
      • KE-SP 6070, with 7.000 kg pulling force and an max. rope length up to 1500 m, Dia. = 14,0 mm
      • KE-SP 6080, with 8.000 kg pulling force and an max. rope length up to 1000 m, Dia. = 16,0 mm
      • KE-SP 6090, with 9.000 kg pulling force and an max. rope length up to 1000 m, Dia. = 16,0 mm
      • KE-SP 60100, with 10.000 kg pulling force and an max. rope length up to 1000 m, Dia. = 16,0 mm
      • KE-SP 60120, with 12.000 kg pulling force and an max. rope length up to 1000 m, Dia. = 16,0 mm
    • Automatic rope guidance to the drum
    • Pre-tension-system
    • Pulling force control by electronic measuring system with USB port and stick - SYSTEM TM 3000
    • Tandem axle chassis with overrunning brake, height adjustable drawbar
    • Metal hood
    • Painting: RAL 5015 (blue)
Read More

Line 8000

Pipe Cleaning and Pipe Renewal Winch Line 8000
15000-20000 daN Pulling force

The hydraulic pump is equipped with a special adjuster. By this it is guaranteed that the adjusted speed is always kept constant.

The pulling speed may be regulated by a hand wheel continuously from 0 to max. Furthermore the pulling force is adjustable by a hand wheel as well from 0 to max. When the pre-selected pulling force is reached the hydraulic pump is regulating to “Zero-supply” and the winch operation is stopping whereas the pulling force is staying constant (pre-tension-system).

Amongst others Thaler Pipe Renewal Winches are used for Pipe Cracking, Pipe Cleaning, Pipe Relining and in combi-
nation with a Swagelining unit.
They are constructed under strict compliance with the machine guidelines of the European Community and with their
chassis approved by TÜV (Technical Surveyance Authorities) they are admitted to the public traffic.

Standard equipment

  • Double capstan system, both capstan heads are driven
  • No chains between hydraulic engine and capstan system
  • Hydrostatic drive
  • Diesel engine
  • 500 m usable rope length, smaller or bigger rope lengths upon request
  • Drum capacity for bigger rope lengths:
      • KE-SP 80150, with 15.000 kg pulling force and an max. rope length up to 1400 m, Dia. = 18,0 mm
      • KE-SP 80200, with 20.000 kg pulling force and an max. rope length up to 1200 m, Dia. = 22,0 mm
    • Automatic rope guidance to the drum
    • Pre-tension-system
    • Pulling force control by electronic measuring system with USB port and stick - SYSTEM TM 3000
    • Tandem axle chassis with overrunning brake, height adjustable drawbar
    • Metal hood
    • Loading equipment with two central crane hooks
    • Painting: RAL 5015 (blue)
Read More